Toptronic
Toptronic Clamp Meter 1000AC/DC True RMS T9105
The Toptronic Clamp Meter 1000AC/DC True RMS T9105 is a cutting-edge solution for industrial electrical professionals seeking accurate measurements in both AC and DC circuits. Engineered with precision and reliability in mind, this clamp meter ensures precise readings for current and voltage, facilitating efficient troubleshooting and maintenance tasks. The True RMS capability enables accurate measurements of distorted waveforms, making it ideal for diverse industrial applications. Its robust design and durable construction make it a dependable tool for electricians, technicians, and maintenance personnel in demanding industrial environments.
Featuring advanced technology, the T9105 is designed to handle a wide range of electrical tasks, from routine maintenance checks to complex diagnostic procedures. The clamp meter's versatility, combined with its True RMS functionality, ensures accurate results in various electrical scenarios. With its user-friendly interface and durable build, the Toptronic Clamp Meter T9105 is an essential tool for professionals seeking precision, reliability, and efficiency in industrial electrical measurements.
Toptronic Clamp Meter 1000AC/DC True RMS T9105 Features:
- Display: 4 digit liquid crystal display (LCD) with a maximum reading of 9999.
- Overrange: “OL.” mark indication.
- Low battery indication: The “ ” is displayed when the
- battery voltage drops below the operating level.
- Measurement rate: 2 times per second, nominal.
- Operating Environment: 0°C to 50°C at <70% R.H.
- Storage Temperature: -20°C to 60°C at <80% R.H. with
- battery removed from meter.
- Accuracy: Stated at ambient temperature 18°C to 28°C
- (65°F to 82°F), <70% R.H.
- Temperature Coefficient: 10% of applicable accuracy
- per °C(5% per °F) out side the range of 18 to 28°C(65°F
- to 82°F)
- Altitude up to 2000m.
- MAX. Cable size: 34Ømm.
- Safety Conformance:
- All input are protected to EN61010-1, 1000V CAT III.
- Pollution ° II.
- EMC-instrument unspecified for use in EMC field
- > 0.5V/m.
- Power: Single standard 9-volt battery, NEDA 1604, JIS
- 006P, IEC 6F22.
- Battery life: 50 hours typical with carbon-zinc.
- Dimensions: 246mm (H) x 80mm (W) x 43mm (D).
DC Volts
- Ranges: 0 to 600.0V
- Resolution: 0.1V
- Accuracy: ±(1% rdg + 5dgts)
- Input impedance: 1MΩ
- Overload protection: 600V DC/AC rms
AC Volts
- Ranges: 0 to 600.0V
- Resolution: 0.1V
- Accuracy:
- ±(1% rdg + 5dgts) on 20 to 100Hz
- ±(6% rdg + 5dgts) on 100 to 400Hz
- Crest Factor <3 at 0 to 300V
- <1.5 at 300 to 600V
- Input impedance: 1MΩ
- Overload protection: 600V DC/AC rms
Frequency
- Range: 20 to 400.0Hz
- Resolution: 0.1Hz
- Sensitivity: 5Vrms. TTL signal
- ≥5A at 20 to 100Hz
- ≥10A at 100 to 400Hz
- Accuracy: ±(0.5% rdg + 5dgts)
- Overload protection: 600V DC/AC rms
AC Current (Accuracy: At the center of CT)
- Range: 0 to 999.9A
- Accuracy:
- ±(2% rdg + 5dgts) on 20 to 100Hz
- ±(6% rdg + 5dgts) on 100 to 400Hz
- Resolution: 0.1A
DC Current (Accuracy: At the center of CT)
- Range: 0 to 999.9A
- Accuracy: ±(2% rdg + 5dgts)
- Resolution: 0.1A
- Overload protection: 1200A DC max for 1 minute
Continuity
- Audible indication: Less than 30Ω
- Overload protection: 600V DC/AC rms.
Resistance (Auto range)
- Ranges: 0 to 999.9Ω, 1000 to 9999Ω
- Accuracy: ±(1.5% rdg + 5dgts)
- Resolution: 0.1Ω/1Ω
- Overload protection: 600V DC/AC rms
Diode Test
- Accuracy: ±(3.0% rdg + 3dgts)
- Resolution: 0.001V
- Test current: 0.2mA±0.1mA
- Test Voltage: <3.0V DC
- Overload protection: 600V DC/AC rms
Capacitance
- Range: 0 to 999.9μF
- Resolution: 0.1μF
- Accuracy: ±(5% rdg + 10dgts)
- Overload protection: 600V DC/AC rms