In modern automation, a stable and clean compressed air supply can make the difference between smooth production and costly downtime. The Festo Small Assembly Mat 11917017 is designed precisely for that purpose: to provide high‑flow air preparation, integrated safety functions, and reliable pressure control in one compact package. Whether you’re upgrading an existing machine or designing a new pneumatic panel, understanding what the Festo Small Assembly Mat 11917017 can do for your system will help you build a safer and more efficient line.
The Festo Small Assembly Mat 11917017 combines shut‑off, filtration, regulation, pressure monitoring, solenoid on/off control, and soft‑start/dump functionality into a single pre‑assembled unit. Instead of piecing together separate FRL components and safety valves, you get a ready‑to‑install assembly built around the Festo MS6 series, complete with mounting brackets and standardized port sizes. That makes the Festo Small Assembly Mat 11917017 an attractive option for OEMs and maintenance engineers who want high performance with minimal engineering time.
Because the Festo Small Assembly Mat 11917017 is already configured with compatible modules, it simplifies selection, installation, and maintenance. You no longer need to worry about mismatched flow capacities or uncertain safety behavior when pressure is lost. In this guide, we’ll walk through the key features, components, specifications, installation guidelines, and common applications of the Festo Small Assembly Mat 11917017, so you can decide if it is the right air preparation unit for your equipment.
What Is the Festo Small Assembly Mat 11917017?
At its core, the Festo Small Assembly Mat 11917017 is a pre‑assembled pneumatic air preparation unit built from MS6‑series modules. It is designed to sit at the main air inlet of a machine or production cell, ensuring that all downstream actuators receive clean, pressure‑regulated air and that the energy supply can be shut off and safely vented in an instant. The Festo Small Assembly Mat 11917017 integrates all of this into a single, compact and robust assembly.
The Festo Small Assembly Mat 11917017 typically includes six primary modules: a manual 3/2 shut‑off valve, a filter regulator, a branching module, a pressure switch, an electrically actuated 3/2 on/off valve, and a soft‑start/dump valve. All of these are mounted together on brackets, using G½ ports for the main flow path. This layout gives the Festo Small Assembly Mat 11917017 high flow capacity while preserving an orderly, easy‑to‑service design for panel builders and maintenance teams.
Because the Festo Small Assembly Mat 11917017 is factory‑assembled, it reduces the number of fittings and potential leak points normally involved when building a custom air prep “train.” The modules are connected using Festo’s MS6 modular connectors rather than separate tees and unions, so you benefit from a cleaner layout and faster installation. For many users, the Festo Small Assembly Mat 11917017 acts as a plug‑and‑play backbone of their compressed air supply at the machine level.
Why Choose the Festo Small Assembly Mat 11917017 for Air Preparation?
When deciding on an air preparation system, engineers often weigh flow capacity, safety requirements, reliability, and ease of maintenance. The Festo Small Assembly Mat 11917017 scores strongly on all of these points, which is why it is widely used in automotive, packaging, general manufacturing, and other industrial environments. With high nominal flows and robust modules, the Festo Small Assembly Mat 11917017 supports medium‑to‑large pneumatic systems without acting as a bottleneck.
One of the main advantages of the Festo Small Assembly Mat 11917017 is its integrated safety behavior. The combination of manual shut‑off valve, solenoid on/off valve, pressure switch, and soft‑start/dump valve allows plant designers to implement safe start‑up and fast energy removal without cobbling together disparate components. This makes the Festo Small Assembly Mat 11917017 a strong choice when you need to comply with machine safety requirements, emergency stop concepts, and lockout/tagout procedures.
Another reason to select the Festo Small Assembly Mat 11917017 is its modularity and future‑proof design. If your system grows or your air quality requirements change, you can extend or modify the assembly using additional MS6 modules such as finer filters, dryers, or lubricators. That flexibility means the Festo Small Assembly Mat 11917017 can evolve with your machine’s needs instead of forcing a full redesign when conditions change.
Core Components Inside the Festo Small Assembly Mat 11917017
The Festo Small Assembly Mat 11917017 derives its capabilities from the individual MS6 modules that form the complete unit. Understanding each element helps you appreciate how the Festo Small Assembly Mat 11917017 delivers both high‑performance air preparation and safety functions. In this section, we’ll break down the major modules and describe their roles in your pneumatic system.
The first element in the Festo Small Assembly Mat 11917017 is usually the MS6‑EM1 manual shut‑off valve. This 3/2‑way bistable valve lets operators isolate the air supply and vent downstream pressure. Turning the lever to the OFF position automatically vents the machine side to atmosphere, enabling safe maintenance and lockout/tagout procedures. With G½ ports and very high flow, it ensures the Festo Small Assembly Mat 11917017 does not restrict your compressed air capacity.
Next in the Festo Small Assembly Mat 11917017 is the MS6‑LFR filter regulator. This combined unit filters out particulates, separates condensate and regulates outlet pressure in a single housing. The 40 µm filter element and manual drain help protect downstream valves and cylinders from moisture and debris. The built‑in pressure gauge makes it easy to read set pressure at a glance, so the Festo Small Assembly Mat 11917017 always delivers stable and clean air to your equipment.
The Festo Small Assembly Mat 11917017 then incorporates an MS6‑FRM branching module. This manifold block allows the main air flow to pass straight through while providing side ports for additional circuits or sensors. In the typical assembly, one of these branch ports is used to mount the pressure switch, while the other can serve auxiliary tools or be capped. This structure is central to how the Festo Small Assembly Mat 11917017 supports monitoring and secondary air feeds without adding complexity.
Pressure Switch for Monitoring and Safety
A key feature of the Festo Small Assembly Mat 11917017 is the integrated pneumatic‑electric pressure switch, typically the Festo PEV‑1/4‑B. Connected to a branch port, this device converts system pressure into an electrical signal that can be used by a PLC or safety relay. By adjusting the setpoint, you can configure the Festo Small Assembly Mat 11917017 to permit machine operation only when pressure is within a safe range, or to trigger alarms if pressure falls below a defined threshold.
Because the Festo Small Assembly Mat 11917017 includes a pressure switch with SPDT contacts, it can be wired in either normally‑open or normally‑closed configurations depending on the control logic. The switch’s robust housing, IP65 rating, and compliance with industrial standards make it suitable for harsh environments. When combined with the soft‑start and dump behavior, this gives the Festo Small Assembly Mat 11917017 a powerful role in your overall safety strategy.
Solenoid On/Off Valve for Remote Control
Further along the flow path, the Festo Small Assembly Mat 11917017 integrates an MS6‑EE solenoid on/off valve, typically with a 24 V DC coil. This 3/2 monostable valve remotely controls the supply of air to the downstream system. In its de‑energized state, the valve vents the machine side; when energized, it opens the path from supply to outlet. This is how the Festo Small Assembly Mat 11917017 enables electrical control of pneumatic energy, often linked directly to an emergency stop or safety circuit.
The electrically actuated valve in the Festo Small Assembly Mat 11917017 supports high flow and rapid switching, making it suitable for large cylinders and fast cycling equipment. With continuous‑duty coil ratings and IP65 protection, it is designed for long service life in industrial environments. A manual override button allows technicians to test or temporarily actuate the valve during commissioning, adding extra flexibility to the Festo Small Assembly Mat 11917017.
Soft‑Start/Dump Valve for Gentle Pressurization
At the outlet end, the Festo Small Assembly Mat 11917017 uses an MS6‑DL soft‑start/dump valve. This component gradually opens to pressurize the downstream system, avoiding sudden pressure surges and abrupt motion of actuators. Once a certain threshold pressure is reached, the valve opens fully for normal operation. When pilot pressure is removed, it dumps the downstream air, ensuring the Festo Small Assembly Mat 11917017 can quickly and safely remove pneumatic energy.
Because the soft‑start valve in the Festo Small Assembly Mat 11917017 is piloted by the upstream solenoid valve, it only opens when the control system commands air to the machine. This linkage ensures that safe start‑up and fast exhaust behavior are coordinated. As a result, the Festo Small Assembly Mat 11917017 can play a central role in meeting safety standards that require energy removal and controlled re‑pressurization after an emergency stop or maintenance event.
Technical Specifications of the Festo Small Assembly Mat 11917017
For engineers and specifiers, the technical data of the Festo Small Assembly Mat 11917017 is crucial. This assembly is designed for high flow, wide pressure ranges, and robust operation in demanding environments. Understanding these parameters helps you verify that the Festo Small Assembly Mat 11917017 fits your application’s air consumption and safety needs.
All main modules in the Festo Small Assembly Mat 11917017 use G½ female ports, providing a generous cross‑section for air flow. The filter regulator typically offers nominal flow around 4500 L/min at 10 bar supply, while the solenoid valve can handle up to approximately 7000 L/min. The manual shut‑off valve often exceeds these values, so it does not become a bottleneck. This ensures the Festo Small Assembly Mat 11917017 can support medium‑to‑large machines without noticeable pressure drop under load.
From a pressure standpoint, the Festo Small Assembly Mat 11917017 is built for versatility. The maximum supply pressure may reach up to around 20 bar, while the regulator can adjust outlet pressure from roughly 0.5 to 12 bar depending on the spring range. The soft‑start valve generally operates in the range of about 4 to 18 bar, with a minimum inlet pressure needed for proper function. This makes the Festo Small Assembly Mat 11917017 suitable for most factory compressed air systems.
When it comes to air quality, the Festo Small Assembly Mat 11917017 is designed to help you comply with ISO 8573‑1:2010 classes such as [7:4:4] for many general industrial uses. The filter regulator uses a 40 µm filter element and has a condensate separation efficiency of around 75%. For more demanding applications, you can replace the element with a finer 5 µm variant or add coalescing filters upstream, and the Festo Small Assembly Mat 11917017 will continue to act as the main control and safety unit.
In terms of environment, the Festo Small Assembly Mat 11917017 can generally operate from about -10 °C up to +60 °C for both ambient and media temperatures, depending on the specific components. Housings are usually made of die‑cast aluminum with NBR seals, while the filter bowl is polycarbonate with a protective guard. All modules are typically RoHS‑compliant and free of paint‑wetting impairment substances, which helps the Festo Small Assembly Mat 11917017 integrate into a wide range of factory settings.
Installing the Festo Small Assembly Mat 11917017 on Your Machine
A major advantage of the Festo Small Assembly Mat 11917017 is how straightforward it is to install. The assembly is delivered with mounting brackets already attached, so you can quickly bolt it to a machine frame, panel, or wall. Because the Festo Small Assembly Mat 11917017 is pre‑aligned and sealed at the factory, your primary tasks are mechanical mounting, connection of air lines, and electrical wiring of the pressure switch and solenoid coil.
When mounting the Festo Small Assembly Mat 11917017, it is generally recommended to position the unit vertically, with the filter bowl at the bottom. This orientation ensures proper condensate collection and reliable operation of the manual drain. Make sure the manual shut‑off lever is accessible to operators and that the pressure gauge is easy to read from normal working positions. Good accessibility turns the Festo Small Assembly Mat 11917017 into a user‑friendly point of service and isolation.
For pneumatic connections, the Festo Small Assembly Mat 11917017 typically has the main air inlet at the manual shut‑off valve and the outlet at the soft‑start valve. Connect your plant air supply to the inlet, and run the outlet to the machine’s main air manifold or distribution lines. Use proper thread sealant, PTFE tape, or Festo seal rings according to the port standard, and ensure that any unused branch ports on the Festo Small Assembly Mat 11917017 are either capped or correctly used for gauges or auxiliary feeds to avoid leaks.
On the electrical side, the Festo Small Assembly Mat 11917017 includes at least two devices that must be wired: the pressure switch and the solenoid coil. The pressure switch usually has a plug connector with common, normally‑open, and normally‑closed terminals, so you can choose how the signal behaves. The solenoid coil typically uses a standard DIN connector and 24 V DC supply. By routing these connections through your safety relay or PLC, you turn the Festo Small Assembly Mat 11917017 into an integral part of your machine’s safety and control architecture.
Commissioning and Maintenance of the Festo Small Assembly Mat 11917017
After mechanical and electrical installation, commissioning the Festo Small Assembly Mat 11917017 should be done carefully and systematically. With the manual shut‑off valve closed, you can first energize the solenoid circuit if required by your safety logic. Then, by gradually opening the manual valve, you begin to feed air into the filter regulator and downstream modules. You will see the system pressure rise slowly as the soft‑start function of the Festo Small Assembly Mat 11917017 restricts initial flow.
During this process, the pressure switch inside the Festo Small Assembly Mat 11917017 can be adjusted to the desired setpoint. Monitoring the signal through your controller or an indicator light, you can fine‑tune the switch so that it changes state at the required safe pressure. Once the soft‑start valve senses sufficient downstream pressure, it opens fully and the machine reaches normal operating pressure. At this point, your Festo Small Assembly Mat 11917017 is ready for full‑speed production.
Routine maintenance on the Festo Small Assembly Mat 11917017 is relatively simple. Periodically, you should drain the condensate from the filter bowl using the manual drain at the bottom. Inspect the filter element for dirt or saturation and replace it when needed, following Festo’s recommendations. Checking for air leaks with soapy water around fittings and module connections is also good practice to ensure the Festo Small Assembly Mat 11917017 continues to operate efficiently.
If any module in the Festo Small Assembly Mat 11917017 needs replacement, the modular design allows you to remove and swap only the affected component. By loosening the connector screws and sliding out the specific module, you avoid disturbing the entire assembly. This reduces downtime and spare‑parts costs. After reassembly, simply retighten the connector hardware, check for leaks, and verify that the Festo Small Assembly Mat 11917017 functions correctly in your safety and control sequences.
Safety, Compliance, and Certifications of the Festo Small Assembly Mat 11917017
Machine builders and plant owners are increasingly focused on safety standards, and the Festo Small Assembly Mat 11917017 is designed with this in mind. While the assembly itself is not a complete certified safety valve package, its components support compliance with important directives and standards. When integrated properly into a machine design, the Festo Small Assembly Mat 11917017 can form a key part of your pneumatic safety strategy.
Many of the electrical and pneumatic elements in the Festo Small Assembly Mat 11917017 carry CE marking and comply with relevant EU directives such as the Low Voltage Directive and Pressure Equipment Directive. The pressure switch often has ATEX ratings for use in specific hazardous zones and meets standards like EN 60947‑5‑1 for industrial control equipment. This ensures that the Festo Small Assembly Mat 11917017 can be used in a wide range of regulated environments when installed correctly.
In North America, components of the Festo Small Assembly Mat 11917017 are frequently cULus Recognized, meaning they are suitable for use in UL‑governed industrial systems when applied according to NFPA and NEC codes. Thread and pressure regulation standards such as ISO 1179, ISO 228, ISO 6953, and ISO 5782 are typically supported. All of this underlines that the Festo Small Assembly Mat 11917017 is not just a convenient assembly, but a professionally engineered solution aligned with international norms.
For applications requiring the highest performance level (PL e) under ISO 13849‑1, Festo offers specialized safety valves that can complement or replace parts of the Festo Small Assembly Mat 11917017. For example, an MS6‑SV safety valve can be used in tandem with or in place of the EE and DL modules to achieve certified safety levels. Even if you do not need PL e, the manual shut‑off, pressure monitoring, and soft‑start/dump features of the Festo Small Assembly Mat 11917017 already provide a strong foundation for safe pneumatic energy management.
Accessories, Alternatives, and Expansion for the Festo Small Assembly Mat 11917017
One of the main benefits of the Festo Small Assembly Mat 11917017 is that it is part of the broader MS6 ecosystem. That means you can customize, expand, or adapt the assembly over time using a range of compatible accessories and modules. Leveraging this modularity helps you future‑proof your investment in the Festo Small Assembly Mat 11917017.
On the accessory side, the Festo Small Assembly Mat 11917017 can be combined with alternative mounting brackets, panel‑mount kits, and a variety of pressure gauges or electronic pressure sensors. You might, for example, replace the standard analog gauge with a digital display or a sensor that outputs an analog signal to your PLC. This allows the Festo Small Assembly Mat 11917017 to become an even more integral part of your data‑driven maintenance strategy.
When higher air quality is needed, the Festo Small Assembly Mat 11917017 can be extended with additional filters, dryers, or lubricators. A coalescing filter or membrane dryer upstream of the regulator can significantly improve air quality, while a lubricator downstream might be beneficial for certain pneumatic tools. The modular connectors make it relatively easy to insert these additions while keeping the Festo Small Assembly Mat 11917017 as the central shut‑off and pressure control unit.
If the flow capacity or physical size of the Festo Small Assembly Mat 11917017 is not ideal for a given application, other MS‑series sizes may be considered. Smaller MS4 units suit compact machines with lower flow needs, while larger MS9 components support very high‑flow systems. However, for many mainstream industrial machines, the Festo Small Assembly Mat 11917017 hits a sweet spot between performance and footprint, making it a practical and powerful choice.
Real‑World Applications of the Festo Small Assembly Mat 11917017
Because it combines so many functions, the Festo Small Assembly Mat 11917017 is used across a huge variety of machines and industries. Anywhere that demands reliable compressed air, safe start‑up, and controlled shutdown can benefit from integrating the Festo Small Assembly Mat 11917017 into the main air supply. Typical examples include automotive assembly cells, packaging lines, material handling systems, and general factory automation equipment.
In automotive and manufacturing environments, the Festo Small Assembly Mat 11917017 is often mounted at the entrance to a robotic cell or assembly station. Operators and maintenance technicians rely on the manual shut‑off valve for lockout/tagout, while the soft‑start valve gently ramps pressure up during start‑up. This reduces the risk of cylinders slamming, parts being ejected, or tooling being damaged when air is reintroduced, and the Festo Small Assembly Mat 11917017 becomes part of everyday safety practice.
On packaging and conveyor systems, the Festo Small Assembly Mat 11917017 helps keep motion smooth and predictable. Pneumatic stops, pushers, and clamps benefit from stable and clean air, while the integrated pressure switch ensures the line does not run at dangerously low pressures. In the event of an emergency stop or power loss, the system vents quickly through the Festo Small Assembly Mat 11917017, helping to bring moving components to a safe state and protecting both operators and product.
In more general factory settings, the Festo Small Assembly Mat 11917017 can be found feeding entire pneumatic panels that serve CNC machines, woodworking equipment, or process lines. Its integrated design simplifies troubleshooting: if there is a problem with pressure, flow, or safety behavior, technicians know to start at the main assembly. This makes the Festo Small Assembly Mat 11917017 not only a critical component for reliability, but also a convenient focal point for maintenance and diagnostics.
Related Festo Small Assembly Mat 11917017 Product Collections
If you are considering the Festo Small Assembly Mat 11917017 for your pneumatic systems, it often makes sense to review related components and accessories that complete your air preparation and actuation setup. These product collections from Industrial Electrical Warehouse can help you build a cohesive, compatible system around the Festo Small Assembly Mat 11917017.
- Festo Pneumatic Components Collection ➜ Explore a wide range of Festo valves, cylinders, fittings, and accessories that complement the Festo Small Assembly Mat 11917017 in high‑performance pneumatic applications.
- Pneumatic Cylinders, Valves & Manifolds ➜ Browse cylinders, solenoid valves, hydraulic‑style actuators, manifolds, and the Festo Small Assembly Mat Nr 11917017 itself to design a complete motion and air‑prep solution.
- Pneumatic Equipment & Air Motors ➜ Discover drives, semi‑rotary actuators, and other pneumatic equipment that make full use of the clean, stable air supplied by the Festo Small Assembly Mat 11917017.
Festo Small Assembly Mat 11917017: Is It Right for Your Plant?
Selecting the right air preparation solution is about balancing performance, safety, reliability, and total cost of ownership. The Festo Small Assembly Mat 11917017 brings all of these aspects together in one coordinated package. By combining manual shut‑off, filtration, regulation, pressure monitoring, solenoid control, and soft‑start/dump functionality, the Festo Small Assembly Mat 11917017 helps engineers build machines that are both productive and safe.
If your equipment relies heavily on pneumatic actuators, the Festo Small Assembly Mat 11917017 can significantly reduce engineering time compared to designing a custom chain of components. Its high flow capacity ensures that air supply will not be a hidden bottleneck, while its integrated safety behavior supports compliance with modern standards. Over time, the modular design of the Festo Small Assembly Mat 11917017 makes it easier to maintain, adapt, or expand as your production needs evolve.
Ultimately, the Festo Small Assembly Mat 11917017 is a strong candidate whenever you need a high‑quality, pre‑engineered air preparation solution for medium‑to‑large pneumatic systems. If you’d like to explore detailed specifications, availability, or pricing, consider visiting the product page for the Festo Small Assembly Mat 11917017 on your preferred industrial supplier’s website. Reviewing the product page alongside this guide will help you confirm that the Festo Small Assembly Mat 11917017 aligns with your technical, safety, and operational requirements before you make a final decision.
